Petits Fours
Professional Salted Caramel Bonbons Recipe
These exquisite bonbons feature a micro-thin, tempered dark chocolate shell that shatters to release a flowing, buttery caramel core. Finished with hand-harvested Fleur de Sel, this recipe delivers the perfect balance of bitterness, sweetness, and mineral saltiness.
- Prep
- 60 min
- Cook
- 20 min
- Serves
- 24
- Level
- Advanced
- Per serving
- 85 kcal
Method
Prepare the Salted Caramel Filling: In a heavy-bottomed saucepan, perform a dry caramelization by melting the sugar and glucose syrup gradually over medium heat until a deep amber color is achieved (185°C). Decuisez (deglaze) the caramel by slowly pouring in the heavy cream, which should be pre-warmed to 80°C to prevent seizing. Stir continuously until smooth.
Emulsify the Filling: Allow the caramel to cool to 45°C. Using a high-speed immersion blender, emulsify the room-temperature butter into the caramel until glossy and perfectly smooth. Stir in the Fleur de Sel by hand. Transfer to a piping bag and allow to cool to 28°C.
Temper the Chocolate: Melt the dark couverture to 45-50°C. Using the tabling method or seeding method, bring the temperature down to 27°C to initiate crystallization, then gently reheat to a working temperature of 31-32°C. Ensure the chocolate remains within this range throughout the molding process.
Shell Construction: Polish polycarbonate molds with cotton wool until frictionless. Fill the cavities completely with tempered chocolate, then tap the mold firmly to release air bubbles. Invert the mold over a parchment sheet to drain, creating a shell thickness of approximately 1.5mm. Scrape the surface clean with a bench scraper and let set at 16-18°C.
Filling the Shells: Once the shells are set, pipe the 28°C caramel filling into each cavity, leaving 2mm of headspace at the top for the base layer. Let the bonbons rest in a cool, dry place for at least 12 hours (or overnight) to allow a skin to form on the caramel.
Capping and Demolding: Re-temper a small batch of dark chocolate to 31°C. Apply a thin layer across the bottom of the mold to seal the bonbons. Scrape away excess chocolate. Refrigerate the mold for 10 minutes at 8°C to encourage contraction, then sharply tap the mold on a flat surface to release the finished bonbons.
Notes
Polish the molds with cotton wool or a microfiber cloth before starting; any residue will prevent the chocolate from achieving a mirror-like shine.
Precision in the caramel cooling stage is vital; if piped above 29°C, the filling will melt the tempered chocolate shells.
Simplified home version: If you do not have a polycarbonate mold, you can use silicone, though you will lose the signature professional 'snap' and shine.
Always use a digital thermometer; tempering is a chemical process that fails if temperatures vary by even two degrees.